Home >> Product >> TCT Hole Cutter >> HCD75 Type          Features   1.Can cut holes up to 75mm thick. 2.The cutting length is 90mm. 3.Using the combination of stacked plate. 4.With more cutting edges make cutting process faster than common tools. 5.One step production of wide range through holes has faster speed than multi-operations tool. 6.Reduce wear while perform a drilling. 7.Produce smoother surface with multiple tooth. 8.The slug is spring ejected when end of cut. 9.The cutters cut at a limited range also saving the machine power.     Specifications   From 22mm to 50mm From 7/8" to 2" Other sizes available by request     Applications   ‧Tool steel ‧Construction steel ‧Cast iron ‧I-beam steel ‧Channel iron ‧Channel iron ‧Steel plates ‧Square iron ‧Stainless steel pipes ‧Use on heavy-duty work required.        SHAJENG HARDWARE CO., LTD        No. 55, Shin Ren 2nd St., Ta Li City, Taichung, Taiwan.       Tel: 886-4-22705610       Fax: 886-4-22736363