Home >> Product >> TCT Hole Cutter >> HC75 Type          Features   1. Can cut holes up to 75mm thick. 2. The cutting length is 90mm. 3. Special designed cutting edges 4. The special tooth arrangement makes cutting smooth. 5. The cutting edges can be re-sharpened. 6. Can be run at higher speeds and higher feed rates. 7. The Hole Cutters are suitable for all kinds of magnetic drilling machines, e.g. Nitto, Hougen, Jancy,      Fein, Alfra, Euroboor, etc.　     Specifications   From 18mm to 50mm From 3/4" to 2" Other size available by request     Applications   ‧Tool steel ‧Construction steel ‧Cast iron ‧I-beam steel ‧Channel iron ‧Steel plates ‧Square iron ‧Stainless steel pipes ‧Cutting of overlapping holes ‧They can bore on the steel, also requires drill on 　heavy-duty works.     Shank Types   Nitto one touch shank, Weldon shank, Fein shank, Alfra quick-in shank, OMI shank        SHAJENG HARDWARE CO., LTD       No. 55, Shin Ren 2nd St., Da Li City, Taichung, Taiwan 41249.      Tel: 886-4-22705610       Fax: 886-4-22736363