1. The spring-loaded shank of cutter picks up the hole
location quickly, and ejects the slug automatically at
the end of the cut.
2. Available with No. 2 to No. 4 Morse taper shanks.
3. The Lubricator is available as an optional attachment which provides continuous and adjustable
coolant flow to the cutting area.
4. To increase the working performance with a water-cooling device.
5. It can change the cutter easily and quickly.
6. Can be used on an electric drill, a milling machine and a magnetic drilling table.
Specifications
ITEM NO.
SHANK OF HOLE CUTTER
LENGTH
DESCRIPTION
MT20500
Φ 19.05mm
163mm
Up to 50mm thick
MT30500
Φ 19.05mm
182mm
Up to 50mm thick
MT30750
Φ 31.75mm
255mm
Up to 75mm thick
MT40750
Φ 31.75mm
276mm
Up to 75mm thick
SHAJENG HARDWARE CO., LTD No. 55, Shin Ren 2nd St.,
Da Li City, Taichung, Taiwan 41249. Tel: 886-4-22705610 Fax: 886-4-22736363
